Відео

Just to say that I can't thank you enough. Thanks for the effort put in the training.

My Huntington Brass GT2620-20 bathroom single lever handle won't budge. I can't move it up or down to turn the water on. Do you think it's just the cartridge, or something else I need to be looking at? TY

Pls send me controls for fire part 2. Many thanks.

Have you got any promo STOP WAFFLING AND GET ON WITH IT 🧢🧢🧢🪖🪖🪖🪖

His beard had a little more ❤ than yours 👍

Have got trains centre at Birmingham

Gawd, I had one of these in my new build. I reckon Ideal are only as popular as they are due to new build developers bulk installing them.

Good video, it is not only boiler that heating your house it is whole system.

Nice van mate, i have 2017 msport and thinking of doing the same as you next time rather than spending stupid money on the msport, i did the same with my wheels. I had my locks done and insurance said the same no discount. Do yourself a favour and check the wetbelt every 60.000miles as it will start to delaminate and if it breaks up quite a lot you risk seizing the engine and they will cost about £ 5000 fitted recon. Or replace belts regular at a cost of £1500 there is a hidden charging point in the rear compartment all the wires are there just need to ad a cigarette lighter to, i did mine in 1/2 hr, easy. its in the rear drivers side under the light cluster. Look up on youtube couple of guys showing how its done.

Hi, i contacted gas safe to ask if the same things apply if you have to check a flue in a loft , in other words a safety guard around the opening, boards to walk on etc . They replied saying the things in BS regulation are recommendations.

Fantastic as always!

Under floor heating is an old technology at this point. The dust and particles canot seatle in the room and will cause lung issues down the line. The healthy option is when the pipes are in the wall.

Great in depth video Derek only critism working pressure at the meter and appliance should be tested with the boiler on maximum and 3 gas rings on Regards Wayne Brown

Brilliant. Whenever I think of Donald Sutherland it is exactly the scene I think about. You got your lip sync perfect.

The reason they don't want you to know about it, is because it's an embarrassment to the name. 120Watt outlet is good for nothing! They would have been better just advising customers to put a second battery in.

Fantastic ⭐

The rip off stupid thing is. You can’t fit a plume kit onto the standard flue like you can with say Worcester. I fitted one last week and you have to have a telescopic flue for plume to fit on. Total waste of money. The end of the flue is riveted so can’t come off

u guys service London area?

Derrick when are you gonna leave the dark side(domestic) amd come to the light(commercial). I think that you know everything about domestic, have taught all whats worth knowing. It's time for a new challenge. Or am I wrong

Hi Derek I’ve noticed at 15 minutes when explaining open flue ventilation in a room , your final calculations are( 135 cm free area ) you didn’t take off the 7kw adventatious air! Shouldn’t it be 100.13 cm squared Love your dedication to educate new & old timers like me. very clear explanation of the regulations and why there implemented. All the best Rob👍🏻

🤘😎🤘

So when we cut a gas pipe and solder on a fitting, no big bang, but Doris turning on her cooker, mushroom cloud! Lol 😂

Welcome back delboy🎉🎉🎉how was Normandy? 🇨🇵🇨🇵🇨🇵. Most gas engineers would purge from the cooker 🔥🔥🔥 domestic 😅😅😅 i did a portfolio job in a HMO what q headache knocking on 6 doors Excuse me you might smell gas 💩💩🔥🤣🤣

Great video 👍🏻👍🏻

The question is, can I have both underfloor and radiators to use for an extra boost?

I am assuming that the cells have a life span, usually 2 to 5 years? If the censor does not need changing, surely you still need to send the unit off annually to be calibrated as required when using the unit for gas safety critical measurements? What happens if the gas engineer installs a cell incorrectly, or puts the wrong cell in and there is an incident, or even if he does put the cell in correctly and there is an issue with the unit which is involved in an incident, 'where is the liability'? I am pretty sure the engineer would be held liable for this incident as he is not deemed competent to install cells into a FGA? Does their FGA have the provision for using as a manometer, and can you get accessories such as a gas sniffer for their FGA?

Extremely help this, thank you very much for posting this and sharing knowledge :)

Anyone use this vise on 1 inch black steel? Does it hold it well?

You didn’t do a spillage test

Hello, have replaces the glands with new ones, used the reseating tool and STILL is it leaking? any idea's please ?

Video quality not good

How I love this film. From one Derek to another, thank you for making this video.

Does a Mk 7 have it?

hope you enjoyed yourselves. I went on the east lancs railway with my kids when we where down visiting my mother and family. we went during the day but no food. but we had good time.

Did you have a nice time mate.

wow that was by far the best tutorial I have watched on youtube. I have an exam tomorrow and was starting to panic but after watching this I completely get it! thank you so much. Absolute lifesaver!

These boilers are really easy to service. There is space inside due to well thought out layout of the components inside. In my opinion, better than worcester, baxi and ideal.

Amazing to know that not many people read the car manuals ..... most of those things are written there!!!!

Great video. Just one question. Why bother with a flue integrity test with the boiler on min fire?

Looking at the spreader plates installed on a floating floor: how thick should the chipboard and engineered wood be? In the clip it mentions the flooring shouldn't be more than 15 mm thick. Is this for both the structural chipboard and the finishing wood layer? Thanks

I've got the Adey Procheck. It's a good idea but most of the time I can't get it to take the 3 photos with the test strip on the card. I've tried 2 different Samsung phones. Sometimes it will work perfect but most times it won't. I tried it yesterday on a boiler change and it didn't work so used the Adey postal test. That's expensive but even worse is if the test fails I have to go back. I've contacted Adey but they weren't helpful.

Hi, if my water is heating and central heating is not coming on what could be the issue? Also my boiler is still under warranty. I'm not sure where the paper work is but will glow-worm have that in their record? The engineer said he would register the warranty.

Just passed my ACS re assessment and got to say a huge part of it was thanks to your content, keep up the good work and thank you!

These are Pre calibrated field replaceable sensors available for the SICA -130 and 230.. Game changer!

Very informative video. Please keep uploading these videos. Thanks N .A heating system Leicester

Derek has propelled our industry forward massively.

What silicone spray did you use on this video

Nice video Derek. While on the face of it a good idea to hide the boiler behind a gas fire I've always thought that these are even less efficient than an open flued floor standing boiler in the kitchen because any heat losses from the exterior of the heat exchanger and pressed `tin' flue collector are lost up the chimney instead of heating the kitchen.

Is balancing gate valve needs to be fitted on cyclinder flow and return or no. On indirect cyclinder

Looking forward to part 6 as deciding between this and the Bluelyzer ST but want to be able do room tests with out buying a separate CO2 detector (use an Anton P6 at the moment)